Stabilizer doses for 25,000 gallons
| Change | Granules (99%) | Liquid (25%) |
|---|---|---|
| Raise 10 ppm | 2.1 lb | 0.78 gal |
| Raise 20 ppm | 4.2 lb | 1.6 gal |
| Raise 30 ppm | 6.3 lb | 2.3 gal |
| Raise 40 ppm | 8.4 lb | 3.1 gal |
| Raise 50 ppm | 11 lb | 3.9 gal |
| CYA 40 → 70 (salt pool) | 6.3 lb | 2.3 gal |
In a 25,000 gallon pool, 2.1 lb (956 g) of stabilizer granules raises cyanuric acid (CYA) by 10 ppm. Taking fresh water from 0 to 40 ppm needs 8.4 lb (3.8 kg). Liquid stabilizer is weaker by weight: 0.78 gal per 10 ppm.
| Change | Granules (99%) | Liquid (25%) |
|---|---|---|
| Raise 10 ppm | 2.1 lb | 0.78 gal |
| Raise 20 ppm | 4.2 lb | 1.6 gal |
| Raise 30 ppm | 6.3 lb | 2.3 gal |
| Raise 40 ppm | 8.4 lb | 3.1 gal |
| Raise 50 ppm | 11 lb | 3.9 gal |
| CYA 40 → 70 (salt pool) | 6.3 lb | 2.3 gal |
Add
8.4lb
of Stabilizer granules (cyanuric acid 99%)
135 oz3.8 kg
Raises CYA from 0 ppm to 40 ppm in 25,000 gal.
Check the product label. Strengths vary by brand, so enter the % printed on yours. Add one chemical at a time, into the water, and never mix chemicals.
Save this test and get reminded when it is time to retest.
Pool Calc for iPhoneComing soon to the App StoreGranules dissolve slowly. Put them in a sock or the skimmer basket with the pump running, and don’t backwash for a week. CYA takes several days to show fully on a test, so don’t top it up before then.
Overshooting is the expensive mistake: nothing you can add lowers CYA, only replacing water does. If you are unsure of your volume, add three quarters of the dose, wait a week and retest.
Manual chlorine pools usually run CYA 30 to 50. Salt water pools run 60 to 80, because the cell makes chlorine all day. Your chlorine target rises with CYA: see the FC/CYA calculator.
That is about the size of an 18 × 36 ft in-ground pool averaging 5 ft deep (about 24,240 gal). In a 25,000 gallon pool doses run to gallons and bags, so pour or broadcast them while walking along the deep end or in front of several returns rather than in one spot. Larger pools take longer to mix: give the pump at least an hour before you retest.
2.1 lb of granular cyanuric acid per 10 ppm. From 0 to 40 ppm: 8.4 lb.
Granules can take several days to a week to dissolve and register on a test. Wait a week before adding more.
Only by replacing water. The drain and refill calculator shows how much.